Products in the RF Engineering Online Directory

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • Passive Devices By Richardson RFPD, Inc.

    Virtually every electronic circuit and/or system requires many passive devices in every section of a given circuit. This is true for a wide variety of applications, from solar and wind power inverters to radar systems, cellular/WiMAX base stations, and industrial power supplies. It is said of... Read More
  • PCB design, board design By NeuronicWorks Inc.

    Our team of dedicated hardware and software engineers will prepare the design and the schematics layout for your custom PCB and circuit boards as per your project requirements. We will source for the best and most cost effective components for your board to ensure the final quality meets and... Read More
  • PECL & LVDS TCXO & VCTCXO By Mercury United Electronics

    TCXO’s bridge the gap between oven compensated OCXO’s & non-compensated Crystal Oscillators for ADSL, SDH, SONET, ATM, 4G & many more applications using frequencies from 12.000MHz to 800.000MHz. Now they are available with either a PECL or LVDS Square Wave output. Read More
  • Phase Master® flexible cable assemblies By Teledyne Storm Microwave

    Phase stable assemblies ideal for applications requiring flatter phase vs. temperature performance or improved phase tracking over temperature. Exceptional phase stability over temperature performance. Good phase stability with handling. Flexible, lightweight construction. Armoring options... Read More
  • Phase Shifters By Advanced Technical Materials (ATM) Inc

    ATM type 410 Waveguide Phase Shifters utilize hybrid design, making it ideal for high power and low loss. The phase shift is approximately linear with dial rotation, but not frequency. These models have 0-360 deg min phase shift over the operating frequency range and are precisely adjustable and... Read More
  • Phase3™ Ultra Low Loss - Series C By MegaPhase LLC

    Series C cable is optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness and low VSWR. Available with phase matching, armoring and in long lengths upon request. Read More
  • Plate - Special Purpose Metals and Alloys By Ed Fagan Inc.

    If you need specialty metals or alloys plate for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of plate products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut back on your... Read More
  • PLXO Series By EM Research Inc

    Phase-locked crystal oscillator. Connectorized or surface-mount package. Optional internal reference (connectorized version). New - smaller package (SMT 0.9 x 0.9 x 0.15 in). Excellent phase noise (Fout = 120 MHz) <-135 dBc/Hz @ 1 KHz. PRODUCT FEATURES • Connectorized or surface-mount... Read More
  • PML Series By Antenna Factor

    Designed for permanent attachment, the PML 1/2-wave whip tilts 180 degrees and delivers outstanding performance in a cost-effective package. An internal counterpoise eliminates external ground plane dependence and maximizes performance. The antenna is attached by placing its base through a 1/4"... Read More
  • PN Series By Antenna Factor

    The PN Series antenna is designed for long-distance directional communication among wireless links. The 16dBi gain and 23° horizontal, 23° vertical directivity are superior to typical Yagi antennas, increasing the range and reliability of your wireless link. The sleek and attractive package is... Read More
  • Power Divider,Power Combiner By Kete Microwave Electronics Co., Ltd.

    Key Features: ◇ Available for 2 Way, 3 Way , 4 Way and 8 Way ◇ High Isolation, Low Insertion Loss ◇ High Power Handling ◇ N or SMA Connectors ◇ Wide Operating Temperature ◇ Custom Design Available Upon Request Read More
  • Power Dividers / Combiners By MECA Electronics, Inc

    Power dividers are used in a wide variety of applications and can satisfy almost any requirement where a signal needs to be distributed or combined. MECA’s compact, microstrip divider/combiners provide minimal insertion loss while delivering high isolation between output ports with exceptional... Read More
  • Power Dividers / Combiners - 50 Ohm By I.F. Engineering Corp

    Offerings include 2 Way, 3 Way, 4 Way, 6 Way, 8 Way, 9 Way, 12 Way , 16 Way and 32 Way. Read More
  • Power Dividers / Combiners - 75 Ohm By I.F. Engineering Corp

    Offerings include 2 Way, 3 Way, 4 Way, 6 Way, 8 Way, 12 Way and 16 Way. Read More
  • Power Dividers/Combiners By Advanced Technical Materials (ATM) Inc

    ATM manufactures a wide variety of 2 Way, 4 Way, and 8 Way Power Dividers/Combiners to meet or exceed your design specifications. Read More
  • Power Supplies By AlfaMag Electronics LLC

    AlfaMag offers a wide range of standard and custom desktop, open frame, and wall-mount power supplies. Utilizing switching technology to increase power density and improve efficiency, all models meet Energy Star Level IV efficiency requirements and comply with FCC Class B EMI standards. CEC... Read More
  • Professional Mechanical Design Service By Chung Nam Electronics Co. Ltd.

    CNE offers product and enclosure design for static and dynamic solutions in both plastic and metal (sheet metal stamping and die-casting enclosures) for low-to-high-volume applications. The mechanical design team, working together with our RFID and Wireless hardware design teams, help to provide... Read More
  • Programmable Attenuator By Broadwave Technologies Inc.

    Model 651-025-127 is a 50 Ohm programmable attenuator with SMA female connectors (other impedance values and connector types are available).These solid-state units are TTL controlled via a 10-pin latch connector. BroadWave programmable attenuators are ideal for automated testing, research and... Read More
  • ProtoMat S63 By LPKF Laser & Electronics

    The ProtoMat S63 circuit board plotter is a bench top system ideal for virtually all in-house PCB prototyping. Features such as automatic tool change, solder paste dispenser, and automatic milling depth adjustment creates ease of use for anyone in the electronics lab. With high speed and... Read More
  • PUSH-ON ADAPTORS FACILITATE SYSTEM TEST By Compel Electronics/Response Microwave

    Devens, MA - Response Microwave, Inc. a specialist in providing innovative customer solutions, is pleased to announce the availability of a new series of quick connect SMA adaptors that expedites general DUT testing. The new units operate DC-18GHz and electrical performance offers typical... Read More
  • PUSH-ON SMA PLUG FACILITATES UNIVERSAL QUICK-CONNECTION By Compel Electronics/Response Microwave

    Devens, MA - Response Microwave, Inc. a specialist in providing customer connectivity and component solutions, is pleased to announce the availability of a new push-on SMA male connector that accommodates universal mating to all threaded SMA female connectors. Part of the Compel family of... Read More
  • PW Series By Antenna Factor

    Designed for permanent attachment, PW Series 1/4-wave monopole and 1/2-wave dipole whips give outstanding performance in a rugged and cost-effective package. The antenna is attached by placing its base through a 1/4" hole in the product and securing it with a nut or by threading it into a... Read More